This easy to use digital display temperature controller can set start and stop temperature. The display and control temperature can be set to 0.1℃ with wide temperature control range from -50℃ to 110℃. It is convenient to install and wiring is simple. It can be either set to heat, or otherwise cool. Widely used in the hatching area, equipment case, air conditioning system, temperature control protection, grow rooms, mushroom temperature control, aquaponics and much more.
-11%
Digital LED Temperature Controller 220V 10A with Waterproof Sensor Probe
Original price was: R190.00.R169.00Current price is: R169.00. incl VAT
10 in stock
Or split into 4x interest-free payments Learn more
No interest, no fees,
4x instalments over 6 weeks
How it works
Payflex lets you get what you need now, but pay for it over four interest-free instalments. You pay 25% upfront, then three payments of 25% over the following six weeks.
1
Shop Online
and fill your cart
2
Choose Payflex at checkout
3
Get approved and
pay 25% today
with your debit
or credit card
4
Pay the remainder
over 6-weeks.
No interest.
No fees.
Temperature Measurement Range: -50 to 110 degree centigrade
Temperature Control Range: -50 to 110 degree centigrade
Measurement Accuracy: +/- 0.2 degree centigrade
Control Accuracy: +/- 0.1 degree centigrade
Measuring input: NTC 10K L = 1M waterproof probe
Input Power: AC 220V
Output Power: 1500W (MAX)
Output Type: Direct output (input/output synchronization)
Output Current: 10A (MAX)
Installation Pitch: 73mm (aperture 4mm)
Size: 61x45x31mm
Applied to incubation, equipment case, air conditioning system, temperature control protection, cabinet cooling system, computer temperature control etc. area.
How to set:
888: Power on, press the UP and DOWN buttons at the same time more than 3 seconds, restore factory setting.
LLL: In use, means sensor is fault.
HHH: In use, means the temperature is above the range.
Instruction:
Press the setting button, enter the internal menu. Press the up and down to switch setting parameter. P0: Set Start temperature
P1: set stop temperature
P2: Set temperature calibration
detect temperature + corrected temperature = actual temperature
P3: Set delay start
Press the setting button, use the up or down button to set delay time( Minutes )
| Weight | 0.2 kg |
|---|---|
| Dimensions | 8 × 8 × 4 cm |
Add a review
Be the first to review “Digital LED Temperature Controller 220V 10A with Waterproof Sensor Probe”
Related products
-
RAM Mixed-Flow Inline Fan – 200mm
Original price was: R2,290.00.R1,799.90Current price is: R1,799.90. incl VAT -
2″ Aluminium Duct Tape – 50mm x 45m
Original price was: R125.00.R109.90Current price is: R109.90. incl VAT -
RAM 400mm Wall Fan (16″)
Original price was: R630.00.R559.00Current price is: R559.00. incl VAT -
There are no reviews yet.