Sunsynk 5kW Hybrid PV Inverter 48V with Wifi Dongle – IP65 rating

The Sunsynk Hybrid Parity Inverter is a highly efficient power management tool that allows the user to hit those ‘parity’ targets by managing power coming from multiple sources such as solar, mains grid and generator and then effectively storing and releasing electric power as the utilities require.

220V single phase, pure sine wave inverter
Self consumption & feed-in to the grid
Auto re-start while AC is recovering
Programmable supply priority for battery or grid
Programmable multiple operation modes; on-grid / off-grid & UPS
Configurable battery charging – current / voltage based on applications by LCD setting
Configurable AC / solar / generator charger priority by LCD setting
Compatible with mains voltage or generator power
Overload / over-temperature / short-circuit protection
Smart battery charger designer optimised battery protection
Limit-function installed to prevent excess power overflow to grid
Supporting Wi-Fi monitoring and built-in 2 strings of MPP trackers
Smart settable 3-stage MPPT charging for optimised battery performance
Time of use function
Smart load function

Sunsynk Battery LFP Wall Mount 5.32kWh 51.2V

Technical Specification


Nominal Voltage 51.2 Vdc
Nominal Capacity 104Ah
Battery Energy 1 5320 Wh
Charge Voltage 55.68~56.16Vdc
Discharge Voltage 45.6-56.16 Vdc
Nominal Charge/Discharge Current 50A
Nominal Charge/Discharge Power 2500W
Max Charge/Discharge Current 100A
Max Charge/Discharge Power 5000W
Short Circuit Current 350A
Warranty 5 Years


Display SOC status indicator, LED indicator
Communication RS232、RS485、CAN

General Specifications

Dimension( W×D×H mm ) 450×150×533mm
Weight (Kg) 45kg
Installation Floor stand or Wall mounted
Working Temperature 2 -20℃ ~ 60℃
Storage Temperature ≤25℃,12 months;       ≤35℃,6 months;       ≤45℃,3 months
Operating / Storage / humidity ≤ 95%RH
Max Operating Altitude ≤2000m
IP Rating IP20
Cell Technology LiFePO4,Lithium Iron Phosphate
Cycle life 3 6000 Cycles @ 80% DOD / 25℃ / 0.5C,60% EOL
Scalability Max 8 batteries in parallel


Battery Cable Set with Sunsynk Battery Connectors


KETO Battery Disconnector with 125A Fuses
This part is made up of the following items:
1 x KETO-00 Fuse-switch-disconnector KETO size 00 body (battery isolator)
2 x N5014607-125A NH Fuse-link 125A for KETO-00
Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety.

KETO size 00
Maximum DC current = 125A
DC voltage rating: 440V
Overall width: 106mm System size: 195mm
Terminals: M8 lugs with cable area from 25-95mm2
DIN rail mountable


* Must be installed by qualified professional installer.
* When using the Sunsynk inverter in combination with the Sunsynk battery, the warranty by Sunsynk on the inverter increases to 10 years and battery is 10 years. You need to register your warranty with Sunsynk

INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.

BEFORE INSTALLATION, please ensure that you check that the Inverter is updated to the latest firmware version. Latest Version 3374

All new Sunsynk Inverters come with the new data logger

For firmware updates, ensure that the inverter is on bypass mode and the PV is off. Failure to do this may damage your inverter.

Weight 75 kg
Dimensions 80 × 60 × 65 cm



There are no reviews yet.

Be the first to review “Sunsynk 5kW Hybrid Inverter IP65 with 5.32kWh Lithium Battery and Disconnector with Cables Kit”

Your email address will not be published. Required fields are marked